What Should Be Paid Attention to When Installing Sand Production Line and Equipment?
What should be paid attention to when installing sand production line?
Pay attention to the following 6 points when installing the sand production line.
- When the sand production line is used for batching and quantitative feeding, in order to ensure stable and uniform feeding and prevent the self flow of the material, it should be installed horizontally. For example, it can be installed with a slight downward inclination of 15 degrees. The specific situation can be adjusted according to the user’s own demand.
- During feeding, the stable operation of amplitude, current and noise of the sand production line shall be checked frequently during operation. If any abnormality is found, the production shall be stopped immediately and the problem shall be solved in time.
- After installation, the vibrating feeder shall have a traveling clearance of 15-20mm, the transverse direction shall be horizontal, and the suspension device shall adopt flexible connection.
- After the installation of the sand production line, during the air test, all bolts must be firm once, especially the anchor bolts of the vibration motor, which should be re tightened after working for about 5 hours.
- During commissioning, it must be noted that the two vibrating motors must rotate in reverse.
- The bearing of the motor shall be lubricated once every two months on average. When it is too hot, the lubricating oil shall be filled once a month. Lubricating oil is very important in the operation of the gravel production line. Reasonable maintenance is conducive to the normal operation of equipment and protect the service life of equipment.
What should be paid attention to when installing sand plant equipment?
The sand production line can realize the mass production of construction sand and stone so that the demand-supply relationship of construction materials can be maintained in a balanced good state for a long time, so as to promote the rapid development of the construction industry. If you want to make it play a better performance, you should do a good job in the installation of equipment in all links. What are the main installation items of the sand production line? What should be paid attention to during equipment installation?
First of all, we need to carry out the specific work of installation according to the installation instructions of the equipment and install it in strict accordance with the standard specifications. We can’t treat it at will. If the installation is not appropriate, it is easy to cause equipment failure during operation, which will have an adverse impact on us.
Secondly, in the specific installation of sand production line equipment, the ground with strong weight-bearing capacity should be selected as the installation site. If the load-bearing capacity of the installation site is poor, it is easy to collapse the ground, which will cause great damage to the equipment, and the personal safety of operators can not be guaranteed. Therefore, we need to consider the installation position in detail. Only those that meet the standards can be selected.
Third, the main shaft of the sand production line equipment shall be installed in a horizontal or vertical state without bending. In this way, the installation effect of the equipment can be better, so that the service performance of the equipment can be brought into full play.
Fourth, we also need to ensure that all parts of the equipment of the sand production line are firm, and there must be no weak connection of parts, otherwise, it is easy to cause dangerous situations in the operation process of the equipment.
Fifthly, after the installation of the equipment of the sand production line, the equipment needs to be inspected and explored in an all-around way. It can only be used in the installation effect is better. If you find that the installation task is not completed well, you need to reinstall it again.
What should be paid attention to in the process of installing sand production line equipment?
Let me introduce the matters needing attention in the process of installing sand production line equipment
- We need to carry out the specific work of installation according to the installation instructions of the equipment and install it in strict accordance with the standard specifications. We can’t treat it at will. If the installation is inappropriate, it is easy to cause equipment failure during operation, which will have an adverse impact on us.
- During the specific installation of sand production line equipment, the ground with strong weight-bearing capacity shall be selected as the installation site. If the load-bearing capacity of the installation site is poor, it is easy to collapse the ground, which will cause great damage to the equipment, and the personal safety of operators can not be guaranteed. Therefore, we need to consider the installation position in detail. Only those that meet the standards can be selected.
- The main shaft of the sand production line equipment must be installed horizontally or vertically without bending. In this way, the installation effect of the equipment can be optimized, so that the service performance of the equipment can be brought into full play.
- We also need to ensure that all parts of the equipment of the sand production line are firm, and there must be no loose connection of parts, otherwise it is easy to cause dangerous situations during the operation of the equipment.
- Only after the sand-making line is explored and installed can the best effect be achieved. If you find that the installation task is not completed well, you need to reinstall it again.
The above are the matters needing attention in the process of installing the sand production line equipment introduced by our company. I hope it can be helpful for you to better install the sand production line.
