Aggregate industry blog updates

Blast furnace slag is a solid waste formed by gangue in ore, ash in fuel and nonvolatile components in solvent (generally limestone) in the process of blast furnace ironmaking. It mainly contains oxides of calcium, silicon,

The double-roller crusher can be used for finely crushing various high and medium hardness ores and rocks in industrial sectors such as mineral processing, chemical industry, cement, refractory materials, abrasives, building materials, etc., especially in

Cement, as a necessary product in the infrastructure industry, must be understood by many friends. With the rapid development of infrastructure industry, the cement market is in short supply, which also leads to the phenomenon

About Energy Saving The energy-saving of the mine runs through all production processes. Here we only focus on the energy-saving problem of using continuous and semi continuous production, using less or no cars and replacing

With the development of our economy, the increasing demand for liquid fuels and the increasing shortage of international oil, fuel saving in mine production has been urgently brought to our face. As far as the

Clay Minerals Clay minerals are viscous soil with few sand grains and have good plasticity. Generally, clay minerals are formed by weathering silicate minerals on the earth’s surface. So can clay minerals make sand? What

In our practical application, the crusher hammer head must be used for crushing materials. The crusher hammerhead is a vulnerable part, which is closely related to the crushing equipment. Therefore, the wear resistance of hammerhead

Dolomite Introduction Dolomite is a carbonate mineral, including iron dolomite and manganese dolomite. Its crystal structure is like calcite and often presents a rhombohedron. It will bubble slowly when it is cold and dilute hydrochloric

Today’s sand and gravel plants are inseparable from this demand for environmental protection. In the environmentally friendly production process, not only must be satisfied from the production process, but also from the equipment configuration and